Why Swim Spa Covers Get Heavy

All conventional foam loaded Swim Spa Covers obtains hefty. However the how and why could come as a surprise. It has nothing to do with rainfall so no matter just how high the taper is, that cover will certainly still get heavy. If it was rain that was making Swim Spa Covers heavy after that putting a roof covering over the spa would certainly prevent the Swim Spa Covers from getting heavy.

Moisture getting trapped in the foam is what ultimately makes Swim Spa Covers to heavy to raise. But if it’s not the rainfall, exactly how does the water act? The answer is steam from the warm swim spa water. When water becomes steam it is a much smaller molecule compared to a drop of water.

The steam can enter a much smaller area, like say the spaces in the foam. Once it cools down and turns into water once again, it’s entraped inside the foam. When entraped in the foam the water will not drain out so a fancy drain hole on the bottom of the cover won’t help. The only way the water could get back out of the foam would be to evaporate. In order to vaporize, the Swim Spa Covers would have to be removed from the source of vapor (the swim spa) and also placed in a completely dry, well aerated area.

The issue has nothing to do with exactly how well the Swim Spa Covers is looked after or what does it cost? plastic protector is scrubed on it. The issue is the foam. The type of foam utilized in Swim Spa Covers is designed to be used as insulation in COMPLETELY DRY applications. For example it works well in floorings, walls and ceilings (providing it is kept completely dry) and also is great for refrigeration applications.

Nonetheless if the very same foam is exposed to steam, the insulation value it could supply is quickly lowered to something comparable to damp plywood.

So why is foam still being used in Swim Spa Covers? It’s cheap as well as it’s the market norm. Yet even if everybody is doing it does not make it the best suggestion.

A hundred years ago the conventional mode of transportation was the horse. The horse had been the expected norm for hundreds of years. Till something better came along.

A much better suggestion as for Lightweight Swim Spa Covers go would be one that removes the foam, still covers, insulates and protects the spa but remains light weight as well as easy to use.

Thirty years ago, (yes actually, thirty years ago) that is exactly how the SpaCap.com was created. A single woman with back problem, had to be able to use her spa on a daily basis for treatment. She needed to be able to get her Swim Spa Covers off and on by herself without more injuring her back.

The cover she ultimately came up with was lightweight, easy to use and also protected in addition to a foam loaded Swim Spa Covers Although it has actually gone through several improvements for many years, the principle and concept is still the exact same. SpaCap.com develops custom-made Lightweight Swim Spa Covers for all sort of spas and Swim Spa Covers

Do not go out and buy another foam loaded Swim Spa Covers just because that’s what the neighbors do. Visit SpaCap.com and get one of their Lightweight Swim Spa Covers that won’t get heavy or break and make it easy for you to use your spa for years to come!

What to Consider Before Replacing Your Swim Spa Cover

What You Should Know Before Buying a New Swim Spa Cover

If you have to replace your Swim Spa Cover this year, there are few essential things you must think about. A Swim Spa Cover is your spa’s first line of defense versus particles and severe weather and is the key to saving money on energy costs as a well-insulated Swim Spa Cover will avoid heat from leaving from the swim spa when it’s not in use.

Here’s what you must understand before purchasing a brand-new Swim Spa Cover

When to Replace a Swim Spa Cover

A Swim Spa Cover usually has to be replaced every 3 to five years if you reside in a northern location and every three to 7 years, if you reside in a warmer area.

Try to find any rips or tears in the vinyl, check the underside of the Swim Spa Cover and try to find wear and tear from mold build-up and chemicals. This takes place since all vinyls are ranked by HOURS outdoors. And the moldy and moldy smell originates from that the foam produces almost best lab conditions for growing mold and mildew.

The solution then to both of these problems would be to change your Swim Spa Cover with one of the Custom Lightweight Swim Spa Covers made by SpaCap.com At SpaCap.com they utilize Sunbrella Marine material which is rated by YEARS outdoors instead of vinyl, and air chambers rather of foam.

A replacement Swim Spa Cover is needed if your old one is waterlogged and heavy and a struggle to get rid of. This is a clear indication that the foam cores are saturated with water.

Again, another factor not to buy another foam filled Swim Spa Cover No matter exactly what the spa dealer tells you, the truth is that every foam Swim Spa Cover ever made is going to end up just like the one you have to replace now.

The SpaCap.com Lightweight Swim Spa Covers with air chambers instead of foam don’t have the mold growing problems and they don’t fill with water. They remain light-weight and easy to use for several years to come.

The concept that a thicker foam cover is going to insulate much better is flawed thinking.

A quality foam filled Swim Spa Cover will be from four to six inches thick. A spa dealer will tell you that if a Swim Spa Cover is too thin, it will not be able to stand up versus severe weather condition conditions and you’ll have to change it more frequently.

What saves you money is a Swim Spa Cover that insulates much better than foam. The Custom Lightweight Swim Spa Covers from SpaCap.com insulate much better than foam without the issues of foam.

If you reside in an area that gets a great deal of snow throughout the winter season, a rigid foam cover, no matter how thick will be crushed by a snow load. Which is why numerous ski resorts around the globe have actually switched to Lightweight Swim Spa Covers made by SpaCap.com

Selecting a Color

Picking the right color for your Swim Spa Cover is an enjoyable however essential choice, as they can enhance and match your surroundings. Here is where all the color options available from SpaCap.com, actually shine. Rather of settling for the five or 6 colors the regional spa dealership has to provide, you can select from more than 130 colors offered from SpaCap.com

Do not just purchase another Swim Spa Cover that is going to end up heavy or broken like the one you have now. Go to SpaCap.com and get a Swim Spa Cover that is going to be easy to use for years to come.

Looking for a Lightweight Swim Spa Cover?

The covers that come with a Swim Spa typically have more sections than a standard hot tub cover. Regrettably, it will still get heavy much like a normal spa cover.

With more areas, they will typically fill at various rates so you end up playing musical chairs with the areas you can still lift. Ultimately, you might even stop aiming to use the bar lifters and simply open 2 sections in the center so you can use the spa.

Even with the bar lifters, getting a saturated swim spa cover back up onto the spa can be a battle. If you have a bad back it’s down best dangerous because of the height of the spa.

Obviously you’ll want to change the Swim Spa Cover with something that will be simpler so you can keep using your spa.

The SpaCap.com Lightweight Swim Spa Covers make the removing your Swim Spa Cover as easy as taking a comforter off a bed. Unlike heavy spa covers that need 2 or more people to raise, SpaCap.com Lightweight Swim Spa Covers can be returned on in seconds normally with one hand.

The SpaCap.com Lightweight Swim Spa Covers use Sunbrella Marine Fabric on the outside which is far superior to the typical spa cover vinyls. All vinyls are rated by HOURS outdoors where Sunbrella is rated by YEARS.

So Sunbrella, not only safeguards your swim spa from scorching sun, rain as well as heavy snowfall, however also last longer than other covers. Since they use air chambers instead of rigid foam, the SpaCap.com Lightweight Swim Spa Covers do not break or get heavy with time.

Energy Efficient

Backed by a 3 years warranty on products and craftsmanship, energy efficient SpaCap.com Lightweight Swim Spa Coversmake sure a low ownership cost.

Searching for A Customized Swim Spa Cover?

Give them a shout! Their craftsmen with 20 years of experience can make a custom Swim Spa Cover for you.

Swim Spa Covers 2021

Years ago, SpaCap.com did offer swim spa covers in vinyl like other manufacturers. Because of this they still get the latest news from the vinyl suppliers.

Here is one of the most recent…

Dear Valued Customer:
We are writing to update you about the challenges we are facing in the coated fabrics & petrochemical industry.

In the last 6-12 months there have been unprecedented events that are impacting the supply chain and raw materials. These events are effecting our costs and lead times like no other time before.

Covid 19 hit the US in March of 2020 and demand surged catching suppliers off guard and unprepared. This, combined with the worst hurricane season in years, a shortage of containers, and gridlock at major US ports overwhelmed the logistics industry.

To further compound the problem, the winter freeze in TX and LA damaged vital manufacturing operations for petrochemical feedstock, impacting global demand for most petrochemicals and which is not expected to recover in the near future.
The net result of these events has greatly impacted our costs and lead times. The main components of our products are PVC, plasticizer and synthetic textile. All of these are in short supply and have all increased in cost by over 50% since October 2020, and will likely continue to increase through Q3. This will result in further pricing action in the coming months. As a result of increased demand and delays at ports, our lead times have been extended an additional 6 to 8 weeks…

If you were wondering why the foam swim spa covers were taking so long to get and costing so much more than they used to, here’s the reason. Materials from China.

Meanwhile, at SpaCap.com they are plugging away, lining up to be the “last man standing” in swim spa cover manufacturing. Yes, their lead time has been extended by a couple weeks since Amazon has taken over shipping priority across the country but since all their materials are Made In the USA they are still going strong.

If you would like to get a new swim spa cover for your spa before the next decade, and your ready for a lightweight, easy to use swim spa cover, in Sunbrella that lasts for YEARS instead of vinyl that is rated by HOURS, visit SpaCap.com.

Swim Spa Covers & Why They Get Heavy

All conventional foam filled Swim Spa Covers get heavy. However the how and why could come as a surprise. It has nothing to do with rainfall so no matter just how high the taper is, that cover will certainly still get heavy. If it was rain that was making Swim Spa Covers heavy after that putting a roof covering over the spa would certainly stop the Swim Spa Covers from getting heavy.

Moisture getting trapped in the foam is what ultimately makes Swim Spa Covers to heavy to lift. But if it’s not the rainfall, exactly how does the water get in? The answer is heavy steam from the warm swim spa water. When water becomes heavy steam it is a much smaller molecule compared to a drop of water.

Heavy steam can enter a much smaller area, like say the spaces in the foam. Once it cools down and turns back into water once again, it becomes trapped inside the foam. When entraped in the foam the water will not drain out so a fancy drain hole won’t help. The only way the water could get back out of the foam would be to evaporate. In order to vaporize, the Swim Spa Covers would have to be removed from the resource of steam (the swim spa) and also placed in a completely dry, well ventilated area.

The issue has nothing to do with exactly how well the Swim Spa Covers is cared for or what it costs. Nor does smearing plastic protector on it. The problem is the foam. The type of foam utilized in Swim Spa Covers is designed to be used as insulation in COMPLETELY DRY applications. For example it works well in floorings, walls and ceilings (provided it is kept completely dry) and also is great for refrigeration applications.

Nonetheless if the very same foam is exposed to steam, the insulation it could offer is swiftly lowered to something comparable to damp plywood.

So why is foam still being used in Swim Spa Covers? It’s economical as well as the market standard. Yet even if everybody is doing it doesn’t make it the best solution.

A hundred years ago the conventional mode of traveling was the horse. The horse had been the standard for hundreds of years. Till something better came.

A much better solution for Lightweight Swim Spa Covers  would be one that removes the foam, still protects but remains light weight as well as easy to use.

Thirty years ago that is exactly how the SpaCap.com was created. A single woman with back problem, had to be able to use her spa on a daily basis for treatment. She needed to be able to get her Swim Spa Covers off and on by herself without more injuring her back.

The cover she ultimately came up with was lightweight, easy to use and also protected in addition to a foam filled Swim Spa Covers Although it has actually gone through several improvements over the years, the principle and concept is still the exact same. SpaCap.com develops custom-made Lightweight Swim Spa Covers for all sort of spas and Swim Spa Covers

Don’t keep buying foam filled Swim Spa Covers just because that’s what the neighbors do. Visit SpaCap.com and get one of their Lightweight Swim Spa Covers that won’t get heavy or break. You’ll be able to use your swim spa without killing your back for years to come.

Swim Spa Covers / When to Replace

Swim Spa Covers are critical, if you wish to maintain that water hot inside the swim spa. Sadly, Swim Spa Covers do not last permanently. Regardless of what your spa dealer could possibly have actually assured, there shall come a time that you are going to need a new Lightweight Swim Spa Cover

Exactly what are the indicators when a swim spa cover has given up the ghost? There could be apparent signs, as well as some that are not so apparent indications. Here are 5 signs of swim spa cover distress to think about.

SpaCap Swim Spa Covers won’t break like foam filled Swim Spa Covers

Saggy Cover

If your foam filled up swim spa cover accumulates water externally, you’ll need a brand-new Lightweight Swim Spa Cover This indicates that whatever was given in regards to the support of the foam boards is currently curved or busted. You’ll find commonly a C-channel that runs along both halves of the spa cover, where they meet at the hinge. Some cover suppliers will make use of materials like aluminum or thin steel at this point, which will certainly bend under weight (dogs, kids, snow), or (more usually) because of the weight of the cover itself.

If this holds true, trying to bleed a longer time from the cover is simply going to end up costing you extra moving forward because whatever insulation worth it might possibly have possessed is gone at this stage. Delaying the unpreventable will simply cost you more in your energy costs. But a lot more significantly considering an usage perspective, you are likely unlikely to want to mess with your cover when it has water in addition to it. Inevitably, you’re using your swim spa much less, which is certainly a sin. Do not be a sinner.

Something to consider below. No matter what your hot tub dealer has to state concerning it, if he only wants to market you one more foam loaded Swim Spa Covers, it is 100% definitely mosting likely to become similar to the one you have to replace currently.

It won’t matter whether it is shrink covered in Kevlar and strengthened with titanium, if it has foam inside, it is doomed to stop working.

Spa CapPuddle Cover

Water is heavy, at 8 lbs. each gallon, it could build up swiftly. An additional case of broken support channel. Possibly started out with a little crimp in the network, which began to puddle some water, as well as a lot even more water– and now it resembles a brand-new Swim Spa Covers remains in order.

Similar to Saggy Cover, this is because of making use of foam panels above a swim spa. Foam panels will certainly fill from the steam coming off the spa water. Not one thing will certainly prevent it other than not making use of foam within your Swim Spa Covers!

The spa dealership might suggest you to attempt to flip the panels over inside the cover to contribute to its beneficial life. Other than the zippers in addition to the plastic material weren’t made to be opened and shut beyond the preliminary padding of the foam.

As soon as a cover begins a progressive pool, it might never be turned around. It’s time to buy a substitute Swim Spa Covers As we claimed above, putting it off implies you’ll be using the swim spa less (a transgression) as well as throwing away cash on the home heating costs.

Water Logged Swim Spa Cover

This could be a Swim Spa Covers that evaluates concerning 3x exactly what it did when it was new. They often obtain so hefty that they come to be beside impossible to utilize short of the aid of a Seal Team. They could additionally damage Swim Spa Covers lifters once they get also heavy. That’s because the cover lifter is not made to deal with a heavy cover. Wager the dealer really did not point out that when he sold it to you.

When the foam core is taking on water– as well as, is not draining. This does not signify that rain water has somehow gotten into your cover, or snow or an additional outdoors source. It takes place when heavy steam increases from the cozy spa water then because it’s a very small particle, gets right into the foam. Once it enters of the foam it cools down and also reverses right into water, and becomes trapped because of that the water molecule is also huge to quit.

The very best method to avoid it would be to never use a foam filled up cover on the swim spa. Regardless of just what the producer asserts to cover it in or the means they package it, the foam will at some point become saturated. Period.

It is time for a new substitute hot tub cover. Once again, putting it off at this point is just most likely to cost you more in your power usage and also unless you have a Seal Team living with you, you aren’t most likely to be utilizing your spa really usually. (Still a sin).

If you wish to be creative, you could take the cover from your spa and also shop it in your garage for a number of months. When the Swim Spa Covers is far from the dampness and being stored inside a completely dry location, at some point the moisture within the cover will vaporize (back to a smaller particle) as well as naturally the foam will certainly lighten once more. It takes months for it to dry completely where case you have to have another substitute cover for your spa while you wait. Note: The cover could still warp hugely unfit while it dries.

If you opt to revolve your covers every three months, you may be capable of making them last until the materials start ahead apart. See Below.

Torn Swim Spa Cover

Torn & Worn Swim Spa Cover.

Whenever the fabric (aquatic quality vinyl on the basic foam filled up Swim Spa Covers) is exposed to its restriction of sunlight as well as weather, it ends up being breakable and also begins to deteriorate. At some point, holes and tears occur that will.

Due to the fact that ALL Plastic, even one of the most costly Marine Quality, are rated by HOURS outdoors.

Utilizing a spa cover protectant is just an additional means for cover dealerships to take your cash. If you want to invest in once a week basis rubbing down your Swim Spa Covers with conditioner, be our guest however the smart point to do would be to get the cover that does not have VINYL outside. Like say the SpaCap.com Lightweight Swim Spa Cover that use Sunbrella Marine fabric, which is ranked by YEARS outdoors.

Still, if the Swim Spa Covers isn’t heavy yet, you could to delay obtaining an additional immediately supplying you do not mind the look of Air duct Tape. If you would like a few pointers, take a look at some episodes of the “Red Green Show.” Red covers the finer factors of Duct Tape.

Stinky Swim Spa Cover.

Moldy, mold, old damp pet– whatever your Swim Spa Covers smells like, if it’s a bad odor, that possibly suggests that you now have bacteria creating inside the hot tub cover. It probably likewise indicates the cover is water logging (see above).

Currently we have crossed over from troublesome to undesirable.

What are you inhaling when this is just what you scent?

Completely taking apart of the cover, as well as splashing it with Lysol won’t assist! Because the resource of the smell, Also Known As the mold and mildew and mildew are stuck inside the foam! The very best you may be able to accomplish would certainly be to kill just what gets on the outside of the plastic or foam nevertheless you are not going to touch exactly what’s inside the foam. Plus currently your cover scents like Lysol, nothing kills the state of mind much faster compared to breathing in something that reminds you of how the college janitor tidied up vomit.

The beginning of the trouble? That excellent quality foam utilized in traditional hot tub covers. Regardless of how much a dealership could attempt to offer how it is extremely immune to water absorption and also germs formation, it will certainly still take place and they understand it.

When you occur to be prepared for a new Lightweight Swim Spa Cover, make sure that it’s not made using a foam core.

If you wondered regarding your Swim Spa Covers making it another year, do not wait. It’s your basic reaction informing you something crucial– swim spa season is year-round!

Dimension One Swim Spas

Dimension One Swim Spa– The Aquatic Fitness System brand of Dimension One is developed not only to unwind, however additionally to exercise, so it represents all of your demands and also dreams connected to swim spas.

You can utilize it to swim, walk, run, stretch, and also strength exercises or simply to take pleasure in the leisure impacts of the swim spa. Regardless of which age you come from, Aquatic Fitness System will most definitely fulfill your expectations.

You can select from 4 sorts of spas according to your requirements. AquaFit Sport’s water management system which guarantees you clean water every time you work out, the powerful swim jets and the cross-training functionality make it your functional underwater gym. What can be much better compared to that?

After your exhausting training session, the AquaFit Pro, provides you with its trademarked Jet Therapy ® cushion, the best leisure experience.

The AquaFit Play will provide you numerous moments of enjoyment with workout, enjoyable as well as leisure as a result of its max treatment seat, copyrighted water cleansing system and stereo and lights plan (optional).

AquaFIT PLUS is the king of Dimension One Swim Spas, not only because it is the biggest one, but likewise because you can change the water temperature separately: you can have a different temperature level in one side of it while you are working out and also another in the other part which is suitable for saturating and also spa.

These luxurious spas have a great deal of technology: they are environmentally friendly and power reliable, include water cleansing systems and interior developments. See their web page to find out more concerning these remarkable swim spas.

When you’re prepared to get a swim spa cover for your investment, go to SpaCap.com While spa producers have actually been working on making as well as constructing swim spas, SpaCap.comhave been building the ideal Lightweight Swim Spa Covers

Regardless of which business you purchase you spa from they will offer a traditional rigid foam filled swim spa cover The issue is that depending on the overall length of your brand-new spa, that swim spa cover will certainly contain three or 4 individual panels. And also much like every other foam filled up swim spa cover ever made, those panels will at some point start to fill with moisture from the steam coming off the spa water, (beginning the day you fill your spa) until they are also heavy to lift. (Normally one area will certainly be especially heavier within 6 months).

Usually with four different sections this will take place at various rates. So you the owner has to prefer to have a hard time to remove as well as change that section or just leave it on and also attempt to utilize your spa under it.

Bar lifters won’t assist as soon as the swim spa cover ends up being also Saturated either because you will certainly still need to tumble it over the bar while attempting not to strain on your own. Then press it off completion of the spa. When the swim spa cover is Saturated it will certainly either rip itself apart (due to the fact that the seam of the cover is not developed to deal with the added weight) or even worse it will certainly rip the bar lifter off the sides of your spa potentially causing damage to the spa closet.

The SpaCap.com Lightweight Swim Spa Covers by contrast, do not utilize foam so there is nothing to absorb the moisture. They are built to remain light-weight as well as easy to use. Visit SpaCap.com and also order one of their Lightweight Swim Spa Covers for your swim spa today.

Catalina Swim Spas

Catalina Spas is the leading spa manufacturer in cutting edge technology and quality fitness and exercise equipment giving the consumer state of the art construction and absolute relaxation. Catalina Spas are carefully constructed to provide years of carefree performance despite frequent, daily use. As a result, we build the best spas and swim spas in the industry with high-quality, efficient heaters, pumps and other components.

Catalina Spas opened its doors for business in 1977 with the concept of creating a quality spa at an affordable price that people could enjoy in the comfort of their own home. The first swim spa was manufactured by Curtis Swim Spas, which was purchased by Catalina Spas in 1985.

Catalina Spas is based in Johnson City, TN 100 miles East of Knoxville and 25 miles South of Bristol. We manufacture and test all our spas by hand. Each spa is personally and individually made to the specifications of each customer.

Catalina Spas introduced the first swim spa in 1980 and continues to innovate the swim spa industry. The creation of the swim spa helped us become one of the largest swim spa manufacturers in the world. From an original past to an even brighter future.

Each customer can personalize their swim spa. The feature options list shows all of the standard and optional equipment, amenities, and upgrades available. Components, cabinets, acrylic, gel coatings, swim tile, and designer glass.

Jets

Catalina’s jets have the power to give you an incredible massage. From deeply relaxing to powerfully invigorating, Catalina’s jets offer a full range of massage types. All our jets are completely adjustable to create just the right amount of pressure to relieve daily stresses improving the body’s natural healing process.

Bluetooth Wireless Technology

Whether you choose to stream music live, or have your own collection of downloaded tunes, this entertainment system allows you to conveniently enjoy music from your Bluetooth® enabled device using Bluetooth® wireless technology. Incorporated into the cabinet, this system features an iPod dock and auxiliary input for other MP3 players.

LED Lights

Nighttime enjoyment becomes enriched with Catalina’s LED lighting systems. With a spectrum of inviting colors the LED lighting systems enhance the spill over waterfall, Trevi pop-ups, crystal water features, cup holders and underwater jets. Our LED light package gives you complete control of the color from your state of the art topside controls.

Water Features

The sound of running water can be extraordinarily soothing, which is why state-of-the-art water features are included on most models. They can be enjoyed independently or with the spa jets activated. Nothing increases your spa experience like the soothing sound and shimmering sight of falling water. The many options available allow you to integrate these spectacular water features in either dramatic or subtle ways that transform any spa and swim spa environment.

Pro-Pole and Exercise Equipment

Our exercise equipment products meet the needs of those who use Catalina’s Swim Spa as a form of physical therapy, training, exercise and recreation. Our swim spas offer health and fitness benefits to people of every age. Catalina’s comfortable belt system on the pro-pole attaches to the swim spa edge so swimmers can maintain position while swimming or exercising. Catalina’s exercise equipment is easy to install or remove by clipping to pre-mounted hooks.

When you’re all set to cover your investment, check out SpaCap.com While spa suppliers have actually been working with developing and also constructing swim spas, SpaCap.com have been developing the best swim spa covers

Regardless of which company you acquire you spa from they will use a conventional rigid foam filled swim spa cover. The issue is that depending upon the general length of your new spa, that cover will consist of three or four individual panels. And like every foam filled cover ever made, those panels will eventually begin to saturate with moisture from the vapor coming off the spa water, (beginning the day you fill your spa) until they are to heavy to lift.

Usually with 4 different sections this will occur at various rates. So you the owner will have to choose to struggle to remove the swim spa cover or just leave it on and also aim to use your spa under it.

Bar lifters won’t help when the swim spa cover becomes to heavy either because you will still need to flop it over bar while trying not to strain yourself. Then you still have to push it off of the spa. When the cover is heavy it will either tear itself apart (since the joint of the cover is not constructed to handle the weight) or even worse it will tear the bar lifter off the sides of your spa possibly creating damages to the spa cabinet.

The SpaCap.com Swim Spa Covers by contrast, don’t use foam so there is nothing to soak up the moisture. They are built to remain light-weight as well as easy to use. Check out SpaCap.com and also order one for your swim spa today.

Spa Manufactures Inc

With Spa Manufcaturers, Inc. there is no middle man! When you buy a spa from Spa Manufacturers, Inc. you are buying directly from a spa manufacturer. We have been manufacturing and shipping spas throughout the United States and around the world for more than 35 years from the same spa manufacturing location.

When you buy from Spa Manufacturers, Inc. you save hundreds – if not thousands – of dollars on your spa and spa product purchases by buying direct from an established spa manufacturer.

Welcome to Spa Manufacturers, Inc … located in the Tampa Bay, Florida area we are your source to buy hot tubs and hot tub spa products direct from an established spa manufacturer!

Jump straight into the details of our swimming spa … or … browse through our selection of twenty-five different inground and portable spas.

We have been building high quality inground and portable hot tubs for over 38 years. With more than twenty-five different inground and portable hot tub spa models available in ten standard marble and granite colors our selection may be fully customized … including personalized therapeutic jet configurations to meet your exact needs.
Our hot tubs set the standard for quality in design, engineering, and craftsmanship!

From all the basic hot tub parts and accessories – to custom spas, inground spas, portable spas, spa gazebos, and the ultimate spa experience – our Waterfall Swim Spa … the staff at Spa Manufacturers, Inc. is here to help you.

When you’re all set to cover your investment, check out SpaCap.com While spa suppliers have actually been working with developing and also constructing swim spas, SpaCap.com have been developing the best swim spa covers

Regardless of which company you acquire you spa from they will use a conventional rigid foam filled swim spa cover. The issue is that depending upon the general length of your new spa, that cover will consist of three or four individual panels. And like every foam filled cover ever made, those panels will eventually begin to saturate with moisture from the vapor coming off the spa water, (beginning the day you fill your spa) until they are to heavy to lift.

Usually with 4 different sections this will occur at various rates. So you the owner will have to choose to struggle to remove the swim spa cover or just leave it on and also aim to use your spa under it.

Bar lifters won’t help when the swim spa cover becomes to heavy either because you will still need to flop it over bar while trying not to strain yourself. Then you still have to push it off of the spa. When the cover is heavy it will either tear itself apart (since the joint of the cover is not constructed to handle the weight) or even worse it will tear the bar lifter off the sides of your spa possibly creating damages to the spa cabinet.

The SpaCap.com Swim Spa Covers by contrast, don’t use foam so there is nothing to soak up the moisture. They are built to remain light-weight as well as easy to use. Check out SpaCap.com and also order one for your swim spa today.

Premium Leisure Swim Spas

Premium Leisure Swim Spas and Aquatic Trainers are manufactured in the United States using only ETL and UL approved electrical components. Each spa is uniquely designed with features and benefits that will grace your backyard and provide years of training, therapy, relaxation and family fun.

They are made of high quality cast acrylic, reinforced with fiberglass and supported by a 16 gauge welded steel frame. They come with a maintenance friendly cabinet, in your choice of colors, to match the décor of your home or landscape. Even the little things like a thick plastic base to protect your decking and isolate the elements of nature are things that are standard with a Premium Leisure Swim Spa.

Of course the exciting part is the fun and benefit you will get from owning a Premium Leisure Swim Spa. Each model, there are eight different ones to choose from, has something different to offer, but most offer the user – Novice to Expert – the opportunity to swim and train without leaving your own back yard. Each model is deep, allowing for various methods of aquatic therapy. Each spa has a variety of therapy sections, both seating and standing, that allows the user to do water resistant exercise, to work on a sore muscle group or to simply soothe the stress of the day, there is a spot for you.

DESIGN, ENGINEERING, & INNOVATION

The Curvilinear design of a Premium Leisure hot tub or spa is very unique and unlike the designs of our competitors, so much so that we had it patented. Much like the auto industry that made multi-linier style lines popular, so too are our hot tubs. This gives them a pleasant and eye-appealing high perception of value.

While most companies will boast that their products are well built and engineered, few can claim, as Premium Leisure can, that their engineering team has well over 100 years of design and manufacturing experience. That experience is evident on the high quality and extraordinary performance of our spas and swim spas. Every vendor, every component and every piece of electrical equipment must meet rigorous standards before it is deemed suitable for use in one of our hot tubs or swim spas.

Creating new designs and concepts is an on-going process at Premium Leisure. Our Premium Spa line, as an example, incorporates as many as 5 unique patents or patents pending. Few companies will go to that expense – at Premium Leisure, it is our mandate (average is not acceptable).

Be it for aquatic training, comfort and relaxation or simply a means to unwind, you will find every Premium Leisure Swim Spa and Trainer is up to the task.

When you’re all set to cover your investment, check out SpaCap.com While spa suppliers have actually been working with developing and also constructing swim spas, SpaCap.com have been developing the best swim spa covers

Regardless of which company you acquire you spa from they will use a conventional rigid foam filled swim spa cover. The issue is that depending upon the general length of your new spa, that cover will consist of three or four individual panels. And like every foam filled cover ever made, those panels will eventually begin to saturate with moisture from the vapor coming off the spa water, (beginning the day you fill your spa) until they are to heavy to lift.

Usually with 4 different sections this will occur at various rates. So you the owner will have to choose to struggle to remove the swim spa cover or just leave it on and also aim to use your spa under it.

Bar lifters won’t help when the swim spa cover becomes to heavy either because you will still need to flop it over bar while trying not to strain yourself. Then you still have to push it off of the spa. When the cover is heavy it will either tear itself apart (since the joint of the cover is not constructed to handle the weight) or even worse it will tear the bar lifter off the sides of your spa possibly creating damages to the spa cabinet.

The SpaCap.com Swim Spa Covers by contrast, don’t use foam so there is nothing to soak up the moisture. They are built to remain light-weight as well as easy to use. Check out SpaCap.com and also order one for your swim spa today.